Airvent Systems is a leading industrial blower manufacturer in India, engineering heavy-duty blowers for continuous-duty industrial airflow applications.
Airvent Systems designs and manufactures heavy-duty industrial blowers engineered to deliver consistent, reliable airflow around the clock. Built with precision-balanced impellers and robust housings, our blowers are trusted across process industries where downtime is not an option.
Request A Quote
Built for 24x7 industrial operation without performance drop.
Dynamically balanced for smooth, vibration-free running.
Robust MS/CI housings built to withstand harsh plant environments.
Engineered to your required CFM and static pressure.
| Parameter | Range |
|---|---|
| Air Volume | Up to 1,00,000 m3/hr (application-specific) |
| Static Pressure | Low to high pressure ranges available |
| Motor Power | 0.5 HP to 300 HP |
| Fan Speed | 500 to 3,600 RPM |
| Operating Temperature | Ambient up to 300C (higher on request) |
| Drive Type | Direct or belt-driven |
Ranges shown are indicative starting points, not a fixed catalog spec. Share your process data with our engineers for an exact recommendation and datasheet.
Gas composition, temperature and dust load determine the correct material. Common options for industrial blowers include:
Final material selection is confirmed based on your specific application, not a default.
Every unit follows the same engineering discipline, from duty point through to final testing.
We start with your required airflow, static pressure, gas temperature and installation altitude.
Blade type and geometry are chosen to hit your duty point at peak efficiency, not pulled from a generic curve.
Casing wall thickness and inlet/outlet sizing are set for your pressure class and mounting arrangement.
Direct-coupled or belt-driven configuration is selected based on speed, space and maintenance access.
Construction material is chosen based on the air or gas being handled, temperature and dust load.
Every blower is run-tested for airflow, pressure and power draw before dispatch.
Material handling and process air circulation in kiln and mill areas.
Combustion air supply and general process ventilation.
High-volume air movement for drying and cooling processes.
Process air circulation in drying and finishing sections.
General-purpose airflow for varied shop-floor requirements.
Auxiliary air supply for combustion and cooling systems.
"Industrial blower" is a general term covering any blower built for continuous industrial duty. A centrifugal blower is a specific design within that category, using a scroll-case impeller to generate airflow at medium to high pressure. Most industrial blowers we supply are centrifugal in design unless the application calls for an axial or high-pressure type.
Airflow required (CFM or m3/hr), static pressure needed, gas or air temperature, altitude of the site, and whether the airstream carries dust, moisture or corrosive elements. If some of this isn't known yet, our engineers can help estimate it from your process description.
Yes. Every blower is engineered to the specific duty point you provide rather than selected from a fixed catalog range, so custom airflow and pressure combinations are the default, not an exception.
Standard construction is mild steel for clean air at ambient to moderate temperatures. Carbon steel, stainless steel (304/316) and hard-faced or coated finishes are available depending on the gas composition, temperature and dust load in your application.
Lead time depends on size, motor power and material of construction. Standard mild steel units are typically quicker to deliver than stainless steel or high-temperature configurations. Exact lead time is confirmed once your specification and drawing are finalized.
